DICOM and STL Files: What They Are and How to Combine Them for Treatment Planning

DICOM and STL show different aspects of the same patient: internal anatomy and oral surfaces. Learn how to integrate these files and verify their alignment in digital treatment planning.

By Dr. Welson Pimentel·Updated ·9 min read

In dentistry, DICOM is the standard used to store and share diagnostic images such as CT scans, while STL is a three-dimensional mesh format that represents surfaces, such as scanned teeth and gingiva. In digital treatment planning, combining these files makes it possible to relate bone anatomy to oral surfaces and the planned restoration. This integration depends on suitable imaging and scans, along with alignment verified by the clinician: importing the files does not guarantee that they are positioned correctly.

DICOM and STL in Dentistry: Why Combine the Files?

CBCT imaging and intraoral scanning answer different questions. The former helps assess internal structures; the latter records the geometry of surfaces accessible to the scanner.

When planning an implant, for example, finding an area with available bone is not enough. That area must be related to the desired tooth position, restorative space, occlusion, tissues, and nearby anatomical structures.

Integrating DICOM and STL connects this information. It is an important foundation for prosthetically driven planning: starting with the intended restoration to evaluate how treatment can support it.

This does not mean every patient needs CBCT imaging and intraoral scanning. The decision to obtain these records should follow the clinical evaluation and the question that needs to be answered, considering diagnostic benefit and radiation exposure.

Read also: Outsourced Implant Planning: Why the Surgeon Must Validate the Guide Before Printing · Prosthetically Driven Implant Planning: The Tooth Leads, the Implant Follows · How to Submit a Case for Digital Planning Without Rework

What Is DICOM in Dental Treatment Planning?

DICOM stands for Digital Imaging and Communications in Medicine. More than a file extension, it is a standard for organizing, transmitting, and interpreting medical images and associated information.

In implant dentistry, its most common use involves cone beam computed tomography (CBCT). A DICOM series allows compatible software to display cross-sectional images of the scanned region and reconstructions of the acquired volume.

What Information Does DICOM Provide?

Depending on the indication and image quality, CBCT can help assess:

  • Alveolar ridge height and width.
  • Relationships to the mandibular canal, foramina, and maxillary sinuses.
  • Root anatomy and impacted teeth.
  • Bone defects and conditions requiring further investigation.
  • Spatial relationships among structures relevant to treatment planning.

This information must be interpreted alongside a clinical examination and radiologic assessment. Three-dimensional visualization is useful, but it does not replace evaluation of multiplanar sections.

It is also important not to confuse CBCT gray values with a universal, directly comparable measure of bone density. Acquisition parameters, the scanner, and reconstruction methods influence these values.

DICOM Is Not a Screenshot of a CBCT Scan

Photographs of the scan, JPEG images, and PDF reports are not equivalent to the DICOM series needed to work with the volume in planning software.

When ordering imaging, confirm that the imaging center provides the exported series in a compatible format. Some centers also provide a viewer, but receiving that program alone does not guarantee that all the data needed for import into other software are available.

What Is STL in Digital Dentistry?

STL is a format that describes a surface using a mesh of triangles. In dentistry, it can represent a dental arch captured with an intraoral scanner, a model digitized with a desktop scanner, or a component designed in CAD software.

Unlike CBCT imaging, an STL file from an intraoral scan does not show the internal structure of bone. It represents the captured surfaces, within the limitations of the equipment and technique used.

What Can an STL Scan Record?

The file can represent the geometry of teeth, preparations, visible gingival tissues, and scanning components such as scan bodies. Quality depends on optical access, moisture control, scanning strategy, and mesh processing.

An apparently smooth surface does not prove accuracy. Software may fill gaps or smooth irregularities even when the actual anatomy has not been adequately captured.

Conventional STL also does not store color or texture and does not specify a standardized unit of measurement. Scale and dimensions should therefore be checked during import. Other formats, such as PLY and OBJ, may carry additional information, depending on the implementation.

DICOM vs. STL: Differences That Matter in Treatment Planning

Aspect CBCT DICOM Scan STL
Primary representation Image volume and metadata Surface mesh
Clinical information Internal anatomy of the scanned region Geometry of captured surfaces
Common source CBCT scanner Intraoral or desktop scanner
Relevant limitations Motion, noise, and metal artifacts Capture errors, distortion, and gaps
Planning use Anatomical and bone assessment Dental, prosthetic, and fit references
Does it replace the other? No No

An important distinction: not every STL comes from a surface scan. An STL mesh can be generated by segmenting a CBCT scan. In that case, the surface is derived from identifying structures within the volume and remains subject to the limitations of the imaging and segmentation process.

Converting DICOM to STL, therefore, is not the same as combining CBCT imaging with an intraoral scan.

How to Combine DICOM and STL in Digital Treatment Planning

This process is called alignment, registration, or superimposition. The goal is to place the datasets in the same coordinate system, matching references that represent the same patient structures.

1. Define the Clinical Purpose Before Requesting Files

Planning begins with the clinical question. Is the goal an anatomical assessment, guided surgery, extensive rehabilitation, or an evaluation of the planned restorative position?

This determines the region that needs imaging, the surfaces that must be scanned, and whether additional references are needed. Protocols for dentate and fully edentulous patients are not necessarily the same.

2. Check Patient Identity, Region, and Timing

Verify the patient, arch, dates, and consistency with the current clinical condition. Extractions, orthodontic tooth movement, new restorations, and tissue changes between acquisitions can compromise alignment or make the plan outdated.

CBCT imaging and intraoral scanning do not necessarily need to take place on the same day, but they must represent compatible clinical conditions.

3. Import and Assess the Quality of Each Dataset

Before superimposition, examine the datasets separately. In the DICOM data, assess anatomical coverage, motion, and artifacts. In the STL, look for missing areas, duplicate surfaces, deformations, and defects in regions of interest.

An acquisition error should not be concealed with editing tools. When essential information is unreliable, it may be necessary to repeat the intraoral scan or reconsider the need for additional radiographic imaging, with clinical justification.

4. Choose Shared, Well-Distributed References

In patients with teeth, dental surfaces recognizable in both the CBCT and intraoral scan often help with registration. References distributed across the arch provide a more consistent check than points concentrated in a small region.

Areas heavily affected by metal, teeth altered between acquisitions, and mobile tissues require caution. Each reference must be identifiable and represent the same structure in both datasets.

5. Perform Alignment and Refinement

Depending on the software, the process may begin with manual point selection and continue with automatic surface matching. Other workflows use automated features from the start.

The automatic result is a proposed match, not clinical validation. An algorithm can produce a visually convincing approximation even when references are unsuitable or there is little shared information.

6. Validate in Cross-Sectional Views and Multiple Regions

Check the relationship between the scanned surface and corresponding structures in multiplanar sections, as well as in the three-dimensional view. Examine anterior and posterior regions and both sides of the arch.

If one area matches while another shows progressively increasing separation, investigate scan distortion, registration error, or incompatibility between acquisitions. When software provides deviation maps or discrepancy metrics, these can support the assessment, but a low average value does not rule out a significant localized error.

7. Only Then Proceed to Restorative and Surgical Planning

Once integration has been validated, add the digital wax-up or prosthetic design when indicated. Evaluate implant positions, prosthetic emergence, anatomical structures, instrument access, and conditions for clinical execution.

If a surgical guide will be fabricated, additional checks of support, seating, stability, components, and compatibility with the surgical protocol are still required.

DICOM and STL Registration in Edentulous Patients

The absence of teeth reduces the rigid references available for matching the files. In addition, mucosa can change shape under pressure, and broad surfaces with few distinctive features make both scanning and registration more difficult.

These cases may require protocols using a reference prosthesis, radiopaque markers, specialized devices, or a dual-scan CBCT protocol, depending on the technique and system used.

No single protocol applies to every edentulous patient. The choice depends on prosthesis stability, anatomy, the intended guide support, and the tools being used.

The protocol must be defined before imaging and scanning. Trying to compensate afterward for missing references can lead to rework or unreliable integration.

Common Errors When Integrating CBCT and Intraoral Scans

Some issues deserve particular attention:

  • Relying only on the 3D view: rendering can conceal differences visible in cross-sectional images.
  • Using areas with substantial artifacts: metal restorations can make tooth contours difficult to identify on CBCT.
  • Aligning only a small area: a local match does not confirm correspondence across the entire arch.
  • Ignoring clinical changes: individually adequate files may no longer represent the same oral condition.
  • Confusing resolution with accuracy: more triangles or smaller voxels do not, by themselves, guarantee a better result.
  • Planning without checking guide support: a coherent virtual plan can still result in difficulty seating the guide clinically.

Final accuracy depends on a chain of steps: acquisition, registration, planning, fabrication, and clinical execution. It is therefore inappropriate to attribute the safety of the entire procedure solely to the software or surgical guide.

In Clinical Practice

In Dr. Welson Pimentel’s approach to digital treatment planning, technology should address a clinical and restorative need, not simply produce an attractive three-dimensional image. His experience in prosthodontics, implant dentistry, and digital planning informs the combined assessment of anatomy and the intended rehabilitation.

A useful teaching example is a single implant between natural teeth. The intraoral scan helps assess the space and shape of the future crown; CBCT allows evaluation of the ridge and its anatomical relationships. Integration connects these assessments without replacing periodontal, occlusal, and soft tissue evaluation.

In extensive rehabilitation, registration requires even greater attention. Small inconsistencies distributed across the arch can affect interpretation of the overall dataset and transfer of the plan to clinical treatment.

The practical guidance is simple: validate the data first, then plan. If an important reference does not match, it is better to resolve the discrepancy before proceeding to fabrication.

Sharing DICOM and STL Files: Organization and Privacy

Files should be sent through appropriate channels, with clear identification and access restricted to those involved in patient care. DICOM series may contain personal information in their metadata; STL files may also be linked to a patient through filenames or the context in which they are shared.

When submitting a case, include the purpose of planning, the region of interest, relevant clinical information, and any necessary supporting files. Preserve the originals and clearly distinguish edited versions to reduce mix-ups and rework.

Have questions about your treatment? Book an assessment at Dr. Welson Pimentel’s dental practice in Botafogo, Rio de Janeiro, to discuss your needs and care options. Visit the dental practice

Conclusion

DICOM and STL are complementary: the former allows clinicians to work with the CBCT volume, while the latter represents surfaces useful as clinical and prosthetic references. The value of combining them lies in data quality and validated alignment, not simply in the ability to view everything on the same screen.

To integrate these files responsibly, define the protocol, check the acquisitions, and assess correspondence before planning or fabrication. If you need support organizing a guided surgery or digital treatment planning case, contact Dr. Welson Pimentel or the Planejamento Express team.

Frequently asked questions

What is the difference between DICOM and STL in dentistry?

DICOM is a standard used to store and share medical images, such as a CBCT volume. STL represents a three-dimensional surface using a mesh of triangles, such as a dental arch captured by a scanner.

Can DICOM be converted to STL?

Yes. Segmenting a CBCT scan can generate a surface that can be exported as STL. However, this mesh is derived from radiographic imaging and is not equivalent to an independent intraoral scan.

How can you tell whether DICOM and STL files are properly aligned?

Corresponding references must be checked in different regions of the arch and in multiplanar sections. The 3D view and software metrics are helpful, but they do not replace clinician validation.

Does intraoral scanning replace CBCT imaging?

No. Intraoral scanning records visible surfaces, while CBCT allows assessment of internal structures. The need for each depends on the clinical evaluation and treatment goals.

Can DICOM and STL files be combined for edentulous patients?

Yes, but the lack of dental references may require specific protocols, such as reference devices or markers. The protocol should be defined before imaging and scanning.

Can any CBCT file be used for digital treatment planning?

No. A DICOM series compatible with the software is generally required, with adequate coverage and quality. Screenshots, photographs, and PDF reports do not replace volumetric data.

Dental care in Botafogo · Rio de Janeiro

Your smile deserves personalized care

Talk to Dr. Welson Pimentel about implants, prosthetics and oral health. An assessment is the first step toward understanding the right care for you.

  • ✓ Dental implants
  • ✓ Dental prosthetics
  • ✓ Oral health
Visit the dental practice →
Dr. Welson Pimentel

Read next

Videos on YouTube

O Código da Cirurgia Guiada · Parte 1O Código da Cirurgia Guiada · Parte 2O Código da Cirurgia Guiada · Parte 3O Código da Cirurgia Guiada · Parte 4O Código da Cirurgia Guiada · Parte 5Técnica de Duplo EscaneamentoTécnica Ibar contra fraturas na zircôniaExoplan sem mistérios · DICOM e STLExoplan sem mistérios · Enceramento diagnósticoBlender for Dental · IntroduçãoBlender for Dental · Malhas e ferramentas

O Código da Cirurgia Guiada · Parte 1

▶ Planejamento Express · Subscribe →
Como desenhar Ti-Base angulado no ExocadScan reverso ou scan analógicoExocad 3.3 · Modelo com análogo digitalUm scan body diferenteIA na confecção de placas oclusaisBiblioteca Exocad de implantes EFFBlender for Dental · Coroa provisória rápidaAula Exoplan · Escolha e posicionamento do implanteComo escanear implantes com MeditMedit splint · JIG de Lucia

Como desenhar Ti-Base angulado no Exocad

▶ Dicas do Pimentel · Subscribe →