Intraoral Scanning vs. Conventional Impressions: Which Should You Choose for Each Case?
Intraoral scanning and conventional impressions can both deliver reliable results, but their indications and limitations differ. Learn what to consider when choosing an approach for restorations, implants, and digital treatment planning.
Choosing between intraoral scanning and conventional impressions depends on the procedure, oral conditions, and the ability to capture the details needed for treatment. Scanning often offers advantages in comfort, communication, and digital integration, while conventional impressions remain a reliable—and, in some situations, more appropriate—alternative. Neither technique compensates for poor moisture control, inadequate tooth preparation, or errors in execution.
Intraoral Scanning vs. Conventional Impressions: How Does Data Capture Differ?
Both techniques serve the same purpose: recording oral structures for diagnosis, treatment planning, or fabrication of appliances and restorations. The difference lies in how that information is captured and transferred.
With conventional impressions, material placed in a tray reproduces teeth and tissues. The impression can then be used to create a physical model or scanned at the laboratory, depending on the workflow.
With intraoral scanning, a camera captures successive images of visible surfaces. Software combines this information to build a three-dimensional model that can be used in treatment planning and restoration design software.
A digital impression is not an X-ray. It primarily captures the surfaces of teeth, restorations, and tissues that the device can visualize. On its own, it does not show roots, nerves, or internal bone volume.
A Digital Workflow Does Not Eliminate Clinical Steps
For some procedures, a digital file can eliminate steps such as shipping the impression and pouring a stone model. However, diagnosis, tooth preparation, tissue management, bite registration, and clinical verification are still necessary.
When guided surgery is indicated, for example, the scan can be integrated with cone-beam computed tomography (CBCT). These records complement one another: one captures surfaces, while the other provides information about internal structures.
Read also: How to Scan a Custom Emergence Profile · Digital Bite Registration: Techniques and Common Errors · How to Choose the Best Intraoral Scanner for Your Dental Practice
Comparing Intraoral Scanning and Conventional Impressions
The most useful comparison does not seek an absolute winner. It identifies which method offers greater predictability for the task at hand.
| Criterion | Intraoral Scanning | Conventional Impressions |
|---|---|---|
| Comfort | Avoids a tray loaded with impression material, but requires moving the scanner tip around the mouth | The volume of material and waiting for it to set may cause discomfort |
| Verification | Allows the clinician to review the record during capture | Requires inspection of the impression after removal |
| Corrections | Many localized defects can be rescanned | Significant defects often require a new impression |
| Moisture and bleeding | May prevent accurate surface capture | May also compromise detail reproduction |
| Digital integration | Simplifies file transfer and CAD/CAM use | May require subsequent digitization |
| Mobile tissues | Optical capture has limitations for functional impressions | Specific techniques allow tissues to be recorded under functional conditions |
| Long-span cases and implants | Require careful attention to the protocol and validation | Require appropriate materials, impression copings, and techniques |
| Required resources | Equipment, software, training, and support | Trays, materials, disinfection, and model handling and shipping |
These differences should be considered in light of the system used, the team's experience, and case complexity.
Which Is More Accurate: Intraoral Scanning or Conventional Impressions?
In many applications, especially single-unit restorations and short-span cases, intraoral scanning can provide clinically acceptable accuracy. That does not mean every digital file is more accurate than a well-executed conventional impression.
The literature reports favorable results for digital workflows across many indications, but also describes variations related to scan span, equipment, scanning strategy, and clinical conditions. Claiming that one technique is always superior oversimplifies a decision that requires individual assessment.
Accuracy Depends on the Entire Workflow
Scanning errors can arise from movement, loss of reference points between images, saliva, reflective surfaces, and limited access. Across large areas, small deviations in image stitching can accumulate.
With conventional impressions, bubbles, tears, tray movement, and changes during storage or model pouring can compromise the result.
Laboratory steps still follow data capture. An adequate record can lead to an unsatisfactory restoration if problems occur during design, fabrication, or component selection.
The best method is the one that delivers enough verifiable information to carry out treatment, not necessarily the one that produces the most attractive image.
Comfort and Time: Are Digital Impressions Always Better?
For many patients, scanning is more comfortable because it eliminates impression material covering a large area of the mouth. This may make treatment easier for patients who are sensitive to the taste of impression materials or have a strong gag reflex.
However, the scanner tip also takes up space. Limited mouth opening, sensitivity, and difficulty accessing posterior areas can make scanning uncomfortable. A scanner does not automatically eliminate the gag reflex.
When considering time, it is important to distinguish capture time from total treatment time. Scanning can speed up laboratory submission and correction of defects, but it involves a learning curve and may require repeat scans.
Conventional impressions can also be efficient when appropriately indicated and performed by an experienced team. For patients, the most meaningful benefit is reducing unnecessary steps without sacrificing quality.
When Should You Choose Intraoral Scanning?
Scanning is often a good option when the required structures are accessible, tissues are adequately managed, and the laboratory can support the proposed digital workflow.
Common applications include:
- Study models and clinical documentation.
- Orthodontic and clear aligner treatment planning, depending on the system used.
- Crowns, veneers, and indirect restorations in selected cases.
- Implant-supported restorations using compatible scan bodies.
- Fabrication of occlusal splints and other appliances, as indicated.
- Integration with CBCT for guided surgery planning.
Scanning for Crowns and Indirect Restorations
For these treatments, capturing the preparation margin is critical. The clinician must identify where the restoration ends and how it relates to the gingival tissue.
If this area is covered by blood, saliva, or gingiva, the scanner cannot reliably record what is not visible. Gingival retraction, hemostasis, and adequate tooth preparation remain essential.
Scanning allows the clinician to magnify the image and review questionable areas before submitting the file. This supports quality control, but requires critical evaluation: surfaces automatically filled in by software should not be mistaken for details actually captured.
When Are Conventional Impressions Still Indicated?
Conventional impressions remain relevant when they better meet the clinical need or when the available digital workflow does not provide sufficient reliability.
This may occur in situations such as:
- A need to record tissues under specific functional conditions.
- Extensive edentulous areas with few anatomical landmarks.
- Difficulty accessing and optically capturing important areas.
- A lack of compatible components or digital libraries.
- A need for an established, validated transfer technique for a particular restoration.
Complete Dentures and Recording Mobile Tissues
In edentulous patients, the challenge goes beyond reproducing the shape of the gingiva. Depending on the treatment, it may be necessary to record functional borders, tissue behavior, and conditions affecting denture retention.
Scanning can be part of this process, but it does not automatically replace every step of a functional impression. Hybrid workflows combining conventional and digital records may be a sensible choice.
It is also important not to treat conventional impressions as an automatic solution for bleeding or lack of access to the preparation margin. These problems must be addressed regardless of the recording technique.
Intraoral Scanning or Conventional Impressions for Implants?
For implants, the record must accurately transfer the position and orientation of the prosthetic connections. In a digital workflow, this generally involves specialized components known as scan bodies.
Reliability depends on factors such as:
- Correct identification of the implant or prosthetic abutment.
- Compatibility between the physical component and the digital library.
- Complete seating and stability of the scan body.
- Adequate visibility of its geometry.
- A scanning strategy appropriate for the extent of the case.
Full-Arch Implant Restorations Require Additional Validation
A single implant and a full-arch restoration do not present the same challenges. In full-arch cases, the distance between components and limited reference points can make accurate image stitching more difficult.
Depending on the case, supplemental records, verification devices, or specialized technologies may be needed to transfer implant positions. Digital capture does not eliminate the need for clinical verification of framework fit.
With conventional techniques, impression coping selection, stability, and the impression strategy are also critical. In either approach, transfer errors can compromise fit and must be identified before the definitive prosthesis is completed.
How to Choose Between Scanning and Impressions: Step by Step
A predictable decision starts before turning on the scanner or mixing the impression material.
- Define the purpose of the record. A study model has different requirements than an extensive implant-supported prosthesis.
- Assess the clinical conditions. Check mouth opening, moisture, bleeding, tissue mobility, and access to critical areas.
- Consider the extent of the case. Localized records and full-arch records require different strategies.
- Confirm workflow compatibility. Coordinate with the laboratory on required files, components, libraries, and steps.
- Establish acceptance criteria. Determine which details must be reproduced and how fit will be verified.
- Choose an alternative if necessary. Combining techniques may be better than persisting with an inadequate record.
This sequence helps prevent a preference for a particular technology from overriding the patient's needs.
In Clinical Practice
In the clinical approach of Dr. Welson Pimentel, whose experience spans prosthodontics, implant dentistry, and digital treatment planning, the choice of recording method should begin with the intended outcome. Technology is a tool for execution and communication, not a substitute for diagnosis.
For a crown, the priority is capturing the preparation, adjacent teeth, and occlusion. For an implant-supported restoration, component identification, transfer of implant positions, and fit verification also come into play.
Guided surgery planning also requires evaluating the alignment between the intraoral scan and CBCT data. A visually satisfactory scan alone does not guarantee that the files have been integrated correctly.
The practical recommendation is to review the record while the patient is still present whenever possible. Identifying an incomplete area at that point can prevent an additional visit, laboratory delays, and decisions based on insufficient data.
Scanner Costs and Value for the Patient
An economic comparison should not be limited to the price of the scanner or impression material. Digital workflows involve training, maintenance, potential licensing fees, and laboratory integration. Conventional workflows involve materials, inventory, shipping, and model fabrication.
Remakes and staff time also affect the cost of both alternatives. It is therefore not possible to say that scanning always reduces expenses or that conventional impressions always make treatment less expensive.
For patients, value lies in appropriate case selection, the best achievable comfort, and the quality of the process. Technology alone does not guarantee a better outcome.
Have questions about your treatment? Book an assessment at Dr. Welson Pimentel’s dental practice in Botafogo, Rio de Janeiro, to discuss your needs and care options. Visit the dental practice
Conclusion
When choosing between intraoral scanning and conventional impressions, the best option is the one that reliably captures the information needed for treatment. Scanning supports digital integration and immediate review; conventional impressions retain important indications and can complement a digital workflow.
Diagnosis, tissue management, technical proficiency, and validation of the result remain central. For a thoughtful approach to integrating scanning, prosthetic components, and digital treatment planning, consider speaking with Dr. Welson Pimentel or planning your case with Planejamento Express.
Frequently asked questions
Does intraoral scanning replace conventional impressions in every case?
No. It is suitable for many indications, but functional tissue impressions and certain extensive restorations may require conventional impressions or a hybrid workflow.
Which is more accurate: intraoral scanning or conventional impressions?
Both can produce clinically acceptable records. Accuracy depends on the indication, the extent of the case, oral conditions, and technique, as well as laboratory procedures.
Can intraoral scanning trigger a gag reflex?
Yes, although many patients tolerate it better than an impression tray loaded with material. The scanner tip and access to posterior areas can still cause discomfort or gagging.
Can implants be scanned to fabricate a prosthesis?
Yes, using compatible scan bodies and an appropriate protocol. Full-arch cases require particular attention to transferring implant positions and clinically verifying fit.
Does an intraoral scanner replace a CBCT scan?
No. An intraoral scanner captures visible surfaces, while CBCT allows evaluation of internal structures, including bone and anatomical landmarks. These records can be combined for treatment planning.
Is treatment with intraoral scanning less expensive?
Not necessarily. Cost depends on the treatment, the clinical and laboratory setup, and the steps involved. The choice should prioritize the quality and suitability of the record.
Dental care in Botafogo · Rio de Janeiro
Your smile deserves personalized care
Talk to Dr. Welson Pimentel about implants, prosthetics and oral health. An assessment is the first step toward understanding the right care for you.
- ✓ Dental implants
- ✓ Dental prosthetics
- ✓ Oral health






















