Milling vs. 3D Printing: When to Use Each Technology

Milling and 3D printing are complementary technologies in digital dentistry. Learn how to choose a fabrication method based on the indication, material, and clinical requirements.

By Dr. Welson Pimentel·Updated ·8 min read

The choice between milling and 3D printing depends on the clinical indication, material, and validation of the fabrication process. Milling is typically the method used for restorations made from ceramics such as zirconia and lithium disilicate, while 3D printing has established applications in models, surgical guides, and certain resin devices. Neither technology is universally superior: success depends on the right combination of design, material, equipment, and quality control.

Milling vs. 3D printing: What is the difference?

Both technologies turn a digital design into a physical object, but they take different approaches. This difference affects the geometries that can be produced, material utilization, surface finish, and the steps required before clinical use.

Dental milling: Subtractive manufacturing

In milling, cutting tools remove material from a block or disc until the planned shape is formed. The equipment follows toolpaths calculated by CAM software, accounting for material properties and tool limitations.

Materials include zirconia, glass ceramics, polymers, and metals, depending on the machine's capabilities. Some restorations still require sintering, crystallization, characterization, or polishing after milling.

Bur diameter and tool access limit the reproduction of certain internal details. A geometry that can be designed in software therefore cannot always be milled exactly as designed.

Dental 3D printing: Additive manufacturing

In 3D printing, an object is built layer by layer. Many dental workflows use light-curable resins, although additive technologies are also available for metals and other materials.

Part orientation, support placement, exposure settings, and post-processing all affect the result. For resins, washing, drying, and post-curing are part of manufacturing—not simply cleaning steps.

A freshly printed device is not necessarily ready for clinical use. It must complete the protocol specified for that material and its intended indication.

Read also: Quality Control in Digital Dental Prosthetics: From Scanning to Delivery · In-Office Digital Dental Lab: Investment and Return · Monolithic vs. Layered Zirconia: How to Choose for Crowns

Comparing milling and 3D printing in dentistry

The table summarizes common trends. The final decision requires checking the material's instructions for use and the compatibility of the entire system.

Criterion Milling 3D printing
Principle Removes material from blocks or discs Builds an object layer by layer
Common applications Ceramic restorations, frameworks, and provisionals Models, surgical guides, anatomical models, and resin devices
Geometric limitations Tool access and diameter Supports, orientation, and interlayer behavior
Post-processing May include sintering, crystallization, and polishing May include washing, post-curing, and support removal
Material utilization Produces leftover stock and milling waste May use material more efficiently, but also generates waste
Batch production Depends on the disc, toolpaths, and machine May allow multiple parts on the same build platform
Critical controls Tools, CAM strategies, and subsequent treatments Print settings, cleaning, and post-curing

None of these characteristics should be considered in isolation. A seemingly faster fabrication process may require more finishing work, and a material with good mechanical performance may not be indicated for the intended device.

When to choose dental milling

Milling is particularly relevant when the indication calls for established materials and protocols for restorations subjected to chewing forces.

Ceramic crowns, veneers, inlays, and onlays

When the treatment plan calls for a lithium disilicate or zirconia restoration within a conventional CAD/CAM workflow, milling is usually the choice. Selecting between these materials depends on the preparation, available thickness, esthetic requirements, and cementation strategy.

This does not mean that every milled restoration is automatically superior. An inadequate design, a poorly captured margin, or incorrect surface treatment can compromise a restoration made with excellent equipment.

For patients, the message is simple: the material should be selected for the tooth and clinical situation, not just its appearance or the name of the technology.

Implant-supported frameworks and restorations

Milling is also used to manufacture frameworks and prosthetic components, provided the material, equipment, and workflow are appropriate. For implant-supported prostheses, fit, connection design, and component compatibility require particular attention.

The fact that a digital library allows a component to be designed is not enough. It is necessary to confirm that the library corresponds to the component being used and that fabrication meets the connection requirements. Implant interfaces should not be treated as generic geometries.

Milled polymer provisionals

Provisional restorations milled from materials indicated for that purpose can be useful in rehabilitations with greater functional demands or a need for extended monitoring. The homogeneity of industrially manufactured blocks is a relevant feature, but it does not eliminate the need to assess thicknesses, connectors, and span length.

The choice should account for the expected duration of use, repair options, and case-specific loads, without assuming that any milled polymer is suitable for every situation.

When to choose dental 3D printing

3D printing offers important advantages for complex geometries and the production of multiple devices. Its benefits depend on application-specific materials and a controlled process.

Study models, working models, and anatomical models

Printed models support diagnosis, patient communication, and laboratory procedures. Anatomical models can also help clinicians understand anatomy and plan surgery.

However, a model intended for case presentation does not necessarily require the same dimensional control as one used to verify prosthetic fit. The intended use should guide resin selection, design, and production settings.

Bases, wall thicknesses, and any internal structures must be planned to prevent distortion and facilitate cleaning.

Guides for implant surgery

3D printing is widely used to manufacture surgical guides. It can reproduce the support areas, inspection windows, and sleeve housings specified in the plan.

Safety, however, depends on the entire workflow:

  • Quality of the CBCT imaging and dental scans.
  • Correct alignment of the files.
  • Coordinated prosthetic and surgical planning.
  • Guide design with adequate support and stability.
  • Compatibility with sleeves, instruments, and the surgical protocol.
  • Validated fabrication and post-processing.
  • Processing for clinical use according to the applicable instructions.

Sterilization should only be performed using a method compatible with the guide and its components, following the manufacturer's instructions. A visually well-finished guide does not, by itself, demonstrate that the treatment plan is safe.

Occlusal splints, impression trays, and resin restorations

Printing materials are available for custom impression trays, occlusal splints, and certain provisional or definitive restorations. These indications, however, are not interchangeable.

Model resin must not be used as a restorative material or for an intraoral device. Likewise, a resin indicated for a crown is not automatically indicated for long-span bridges.

It is necessary to verify the applicable regulatory status, instructions for use, and validated combination of printer, settings, and post-curing protocol. Appearance, rigidity, or ease of polishing cannot replace this verification.

Accuracy: Does milling or 3D printing provide a better fit?

It is incorrect to claim that either technology is always more accurate. The result depends on the application being evaluated and the entire workflow.

In milling, the following affect the result:

  • Machine calibration and maintenance.
  • Tool wear and diameter.
  • Milling strategy and material fixturing.
  • Compensation settings and heat treatments, when required.

In printing, key factors include:

  • Equipment calibration and settings.
  • Orientation and support distribution.
  • Resin condition and handling.
  • Washing, post-curing, and finishing.

Layer height alone does not represent the accuracy of a printed part. Similarly, the number of axes on a milling machine does not guarantee a better clinical fit.

It is useful to distinguish fidelity to the design from process repeatability. Producing parts that resemble one another is not enough if they all have the same deviation. Validation should assess critical surfaces, seating, contacts, and function, depending on the device.

Cost and productivity in the CAD/CAM workflow

Comparing only the price of a block with the volume of resin produces an incomplete analysis. The true cost includes fabrication, labor, and the risk of rework.

For milling, costs include tools, maintenance, disc utilization, and any required furnaces. For printing, calculations should include supports, failed prints, washing and curing equipment, consumables, occupational protection, and proper waste disposal.

Design time, file review, and finishing also matter. A printer can produce several parts on the same build platform, but the productivity gain depends on the technology, object height, and post-processing capacity.

For practices with variable demand, outsourcing may make more sense than maintaining underused equipment. The decision between in-house production and a specialized service should consider volume, staffing, and the ability to document the process.

How to choose between milling and 3D printing: Step by step

1. Define the device and its function

Start with the clinical need: a definitive crown, provisional restoration, surgical guide, splint, or model. Document the duration of use, tissue contact, and mechanical requirements.

2. Choose the material based on its indication

Before selecting a machine, confirm which materials meet the needs of the case. Consider minimum thicknesses, span length, finishing, cementation, and processing for clinical use.

3. Check the digital data

Incomplete scans, inconsistent bite registrations, and incorrect alignments compromise both technologies. In implant dentistry, verify components, libraries, and scan body seating.

4. Adapt the design for fabrication

For milling, account for tool access. For printing, plan orientation and supports without compromising critical surfaces. The design must be manufacturable and clinically appropriate.

5. Validate the production workflow

Confirm the specified equipment, settings, and post-processing steps. Record the material, lot number, and relevant steps to support traceability and failure investigation.

6. Perform the final inspection

Check integrity, fit, and finish before delivery. When needed, perform a clinical try-in or intermediate verification steps: viewing the design in software does not replace this assessment.

In clinical practice

From Dr. Welson Pimentel's clinical perspective, developed over more than 30 years in practice and through work in digital planning, the most useful question is not “Which machine is better?” but “Which process safely meets the goal of this case?”

In an implant-supported rehabilitation, for example, the same treatment plan may involve a printed surgical guide, a printed working model, and a milled ceramic restoration. The provisional restoration may follow a different fabrication route, depending on the material's indication and functional requirements. This is an example of integration, not a universal formula.

Communication among the dentist, designer, and laboratory is another important factor. The file should be accompanied by the indication, component used, requested material, and identification of surfaces that must not be altered arbitrarily.

When a fit problem occurs, immediately switching technologies may simply reproduce the problem. A more productive approach is to review data acquisition, the library, design, fabrication, and finishing to identify the source of the deviation.

Have questions about your treatment? Book an assessment at Dr. Welson Pimentel’s dental practice in Botafogo, Rio de Janeiro, to discuss your needs and care options. Visit the dental practice

Conclusion

Choosing between milling and 3D printing requires matching the clinical indication with the material and a validated process. Milling plays a central role in many ceramic restorations and frameworks; printing expands the possibilities for models, guides, and specific resin devices.

The best digital workflow often combines technologies, with process control and clinical verification. To evaluate the fabrication route for a case, consider speaking with Dr. Welson Pimentel or working with Planejamento Express for digital planning integrated with clinical execution.

Frequently asked questions

Which is better: dental milling or 3D printing?

It depends on the indication and material. Milling is commonly used for ceramic restorations, while 3D printing is frequently used for models, guides, and specific resin devices. Both require a validated process and quality control.

Can a definitive crown be 3D printed?

Yes, materials are available for this indication, but the instructions for use, applicable regulatory status, and compatibility among the printer, settings, and post-curing protocol must be verified. Not every restorative resin is suitable for every crown or bridge.

Is 3D printing less expensive than milling?

Not necessarily. The comparison should include materials, equipment, maintenance, labor, post-processing, and rework. Printing may offer advantages for batch production, but the final cost depends on the device and production volume.

Does a smaller print layer height guarantee greater accuracy?

No. Layer height is only one parameter. Calibration, orientation, supports, exposure, washing, and post-curing also affect dimensional fidelity and fit.

Can a surgical guide be used immediately after printing?

No. It must undergo washing, drying, post-curing, finishing, and inspection according to the material's protocol, as well as appropriate processing for clinical use. The sterilization method must be compatible with the guide and its components.

Can milling and 3D printing be combined in the same treatment?

Yes. A treatment can use a printed guide and model along with a milled restoration. Integration should be based on reliable data and an appropriate indication for each material and device.

Dental care in Botafogo · Rio de Janeiro

Your smile deserves personalized care

Talk to Dr. Welson Pimentel about implants, prosthetics and oral health. An assessment is the first step toward understanding the right care for you.

  • ✓ Dental implants
  • ✓ Dental prosthetics
  • ✓ Oral health
Visit the dental practice →
Dr. Welson Pimentel

Read next

Videos on YouTube

O Código da Cirurgia Guiada · Parte 1O Código da Cirurgia Guiada · Parte 2O Código da Cirurgia Guiada · Parte 3O Código da Cirurgia Guiada · Parte 4O Código da Cirurgia Guiada · Parte 5Técnica de Duplo EscaneamentoTécnica Ibar contra fraturas na zircôniaExoplan sem mistérios · DICOM e STLExoplan sem mistérios · Enceramento diagnósticoBlender for Dental · IntroduçãoBlender for Dental · Malhas e ferramentas

O Código da Cirurgia Guiada · Parte 1

▶ Planejamento Express · Subscribe →
Como desenhar Ti-Base angulado no ExocadScan reverso ou scan analógicoExocad 3.3 · Modelo com análogo digitalUm scan body diferenteIA na confecção de placas oclusaisBiblioteca Exocad de implantes EFFBlender for Dental · Coroa provisória rápidaAula Exoplan · Escolha e posicionamento do implanteComo escanear implantes com MeditMedit splint · JIG de Lucia

Como desenhar Ti-Base angulado no Exocad

▶ Dicas do Pimentel · Subscribe →