Implant Impression Copings: Open Tray vs. Closed Tray
With an open tray, the impression coping stays in the impression; with a closed tray, it is usually repositioned after removal. Learn how to choose a technique based on the case and implant system.
An open-tray impression coping remains embedded in the impression material after it is unscrewed. With the conventional closed-tray technique, the coping stays in the mouth and is then connected to an analog and repositioned in the impression. Choosing between open-tray and closed-tray impression copings depends on the number and angulation of the implants, clinical access, and the impression level—implant level or abutment level.
What Is an Implant Impression Coping Used For?
An impression coping records the position of an implant or prosthetic abutment relative to the tissues and other structures in the arch. This record allows the laboratory to position the analog in the working cast to fabricate the prosthesis.
With indexed components, the record also captures the rotational orientation of the connection. An inaccurate transfer can compromise restoration seating, proximal contacts, and the spatial relationship among multiple implants.
It is important to distinguish three components:
- Impression coping: The component used to record position during the impression procedure.
- Analog: The component that replicates the implant or abutment interface in the cast.
- Abutment: The component that establishes the prosthetic connection and may remain in the mouth.
Although these components work together, they are not interchangeable. The connection, platform, and impression level must match the treatment plan and the system specifications.
Read also: Quality in Implant Prosthetic Components: ISO 13485 and What It Guarantees · Multi-Platform Implant Components: Less Inventory, Greater Efficiency · Hand Drivers and Torque Wrench Drivers: Choosing the Right Tool
Open-Tray Impression Copings: How the Pick-Up Technique Works
In the open-tray technique, also called the pick-up technique, the tray has an opening that provides access to the coping screw. Once the impression material has set, the clinician loosens the screw before removing the impression.
The coping comes out with the impression, retained in the material. The corresponding analog is then connected to the coping without removing and reinserting it.
This eliminates the step of manually repositioning the coping in its imprint within the impression. That is a meaningful advantage when multiple components must be recorded and their spatial relationship requires greater control.
When to Consider an Open-Tray Impression Coping
This technique is commonly considered for:
- Multiple-implant restorations.
- Long-span or full-arch fixed prostheses.
- Situations in which repositioning the copings would be unreliable.
- Cases in which the copings will be splinted to stabilize the assembly.
Divergent implants may also favor this approach, but the open-tray technique does not automatically eliminate removal difficulties. The degree of divergence, component undercuts, and behavior of the impression material still matter.
Limitations of the Open-Tray Technique
The opening must allow access to the screws without excessively weakening the tray. Access may be difficult in posterior regions or in patients with limited mouth opening.
The material must also leave the area needed for driver insertion accessible. A technically sound impression is of little use if the tray cannot be removed because a coping is still connected to the implant.
Closed-Tray Impression Copings: How the Transfer Technique Works
In the conventional closed-tray technique, the tray does not need an access window for the screws. After the material sets, the impression is removed while the coping remains connected to the implant or abutment.
The clinician then removes the coping from the mouth, connects it to the analog, and repositions the assembly in the imprint left in the material. Repositioning must accurately reproduce both depth and orientation.
The coping's shape helps identify its position, but verification is still necessary. Slight rotation or incomplete seating can alter the analog's position in the cast.
When to Consider a Closed-Tray Impression Coping
This is a common option for single-implant cases and cases involving only a few implants, especially when conditions favor predictable removal and repositioning.
It can also simplify the procedure when access to the screw head through an open tray would be limited. However, the component must still be safely placed and removed, including in posterior areas.
Systems With Transfer Caps
Some systems use transfer caps or snap-on devices that remain in the impression material even when a closed tray is used. In these cases, the sequence differs from the conventional repositioning technique.
For this reason, the terms “open tray” and “closed tray” do not replace the manufacturer's instructions. The transfer mechanism and component compatibility must be confirmed before the appointment.
Open-Tray vs. Closed-Tray Impression Copings: A Practical Comparison
The comparison below applies to conventional pick-up and transfer techniques. Individual systems may have specific features.
| Criterion | Open Tray | Closed Tray |
|---|---|---|
| Coping after impression removal | Remains embedded in the impression | Initially remains in the mouth |
| Screw access with the tray in place | Required after the material sets | Not required to remove the tray |
| Manual repositioning in the impression | Not performed | Required in the conventional technique |
| Common use | Multiple implants and extensive restorations | Single-implant or less complex cases |
| Critical step | Releasing the screws and maintaining coping stability | Complete seating and correct orientation during repositioning |
| Splinting the copings | May be part of the protocol | Not part of conventional repositioning |
| Important clinical limitation | Access through the tray window | Reliability of repositioning |
Neither technique compensates for an improperly seated or incompatible coping. Before comparing convenience, confirm that the component records the correct interface.
Which Implant Impression Technique Is More Accurate?
There is no universal answer based solely on tray type. Accuracy depends on the entire process: components, seating, material, tray rigidity, removal, analog connection, and laboratory processing.
In general, the literature suggests advantages for pick-up techniques, particularly with splinted copings, in certain multiple-implant situations. However, results vary with component design, implant angulation, and the protocol used; a substantial portion of these comparisons comes from laboratory studies.
In a favorable single-implant case, a closed tray can provide an adequate record. In an extensive restoration, avoiding individual repositioning of multiple copings may reduce one source of error.
Is Splinting the Impression Copings Always Necessary?
No. The decision depends on the extent of the restoration and the stability needed for the assembly.
When indicated, splinting requires control of shrinkage in the material used. Depending on the protocol, the splint may need to be sectioned and rejoined after initial polymerization. Splinting copings without controlling stresses can introduce distortion rather than prevent it.
Adequate space must also be left for the impression material, and unwanted contact between the splint and the tissues or tray should be avoided.
How to Select an Impression Coping: Connection, Platform, and Impression Level
Before choosing an open or closed tray, identify exactly which interface will be transferred. Taking an implant-level impression is not the same as taking an impression of an abutment already in place.
Implant-Level Impressions
The coping connects directly to the implant interface. Confirm the system, connection, platform, and indexing features.
Do not assume compatibility simply because two components look similar or accept visually similar screws. Internal geometry and manufacturing tolerances also matter.
Abutment-Level Impressions
The impression records the prosthetic component that establishes the interface for the future prosthesis. The coping and analog must match that abutment, not simply the connection of the implant beneath it.
This is particularly important in multiple-implant restorations. Mixing components from different impression levels compromises the laboratory's ability to reproduce the case.
Indexed and Nonindexed Components
Single-unit restorations generally require the antirotational orientation to be recorded. For multiunit prostheses, nonindexed components may be available, depending on the system and prosthetic design.
Selection should follow the manufacturer's indications and the restorative plan, not merely the appearance of a component available in the office.
Step-by-Step Implant Impressions With Open-Tray or Closed-Tray Copings
An organized sequence helps prevent errors with either technique.
1. Confirm the Components Before the Appointment
Verify the implant or abutment, platform, coping, screw, driver, and analog. Coordinate the impression level and planned restoration with the laboratory.
2. Evaluate the Tissues and Component Seating
Remove debris and check for possible soft tissue interference. Place the coping and verify complete seating. When seating is uncertain or the interface is difficult to visualize, radiographic evaluation may be indicated when clinically justified.
3. Try In the Tray
Check rigidity, space for the material, and the path of insertion. With the open-tray technique, test access to every screw before loading the tray.
4. Prepare the Impression Material
Use a material appropriate for the procedure, following the manufacturer's instructions for handling, compatible adhesive, and working and setting times. Set rigidity, tear strength, and ease of removal must be considered together.
5. Perform the Transfer
With an open tray, allow the material to set and loosen all screws before removal. With a conventional closed tray, remove the impression, remove the copings from the mouth, and connect the analogs for repositioning.
With either technique, avoid movements that distort the impression or displace components.
6. Inspect and Send to the Laboratory
Check for voids, tears, coping mobility, and complete seating of the assemblies. Disinfect using a method compatible with the material and provide clear laboratory instructions. Questionable impressions should be retaken, not compensated for through assumptions.
Errors That Compromise Implant Impressions
Several errors deserve attention regardless of the technique:
- Partially seated coping: Tissue or debris can prevent complete engagement.
- Incorrect screw: An incompatible length or geometry can create a false sense of secure attachment.
- Flexible tray: Deformation during removal compromises the spatial record.
- Incompatible analog: An apparent fit does not confirm correct compatibility.
- Rotation during analog connection: Handling can displace the coping within the material.
- Incomplete repositioning: With the closed-tray technique, the assembly may appear seated without reaching its final position.
Tighten components according to the manufacturer's instructions. Indiscriminately increasing force does not correct incompatibility and can damage components.
In Clinical Practice
In Dr. Welson Pimentel's clinical approach, technique selection is part of prosthetic treatment planning: what structure will be fabricated, which interface will support it, and how the record can be verified.
His work in prosthodontics, implant dentistry, and digital planning emphasizes the importance of coordination between the dental office and laboratory. Choosing “open tray or closed tray” without identifying the components, access, and extent of the prosthesis leaves essential questions unanswered.
A practical approach is to review the case at three points: before the impression to confirm compatibility; during the procedure to verify seating and stability; and before definitive fabrication to evaluate the reliability of the cast and the need for clinical try-ins.
For extensive restorations, verification devices may be part of this quality-control process. The goal is not to add steps automatically, but to detect discrepancies before they become incorporated into the final framework.
Conventional Impression Copings vs. Scan Bodies: What Is the Difference?
In a digital workflow, a scan body provides geometric references that allow the software to locate the implant or abutment. It serves a transfer function, but should not be treated as a conventional impression coping used in a different way.
Selection requires compatibility among the component, digital library, and prosthetic interface. Seating, visibility, and scanning strategy also influence the result.
Scanning does not make conventional impressions obsolete. Arch extent, implant distribution, and the ability to verify the record guide the choice among conventional, digital, and combined workflows.
Have questions about your treatment? Book an assessment at Dr. Welson Pimentel’s dental practice in Botafogo, Rio de Janeiro, to discuss your needs and care options. Visit the dental practice
Conclusion
The main difference between open-tray and closed-tray impression copings is how implant position is transferred: by picking up the coping and retaining it in the impression, or by repositioning it afterward. The open-tray technique often offers advantages for multiple-implant and extensive restorations; the closed-tray technique may be appropriate for simpler situations with reliable repositioning.
The outcome depends on compatibility, seating, stability, and verification—not just the technique's name. To integrate prosthetic components and a digital workflow into your case, contact Dr. Welson or explore the planning support available through Planejamento Express.
Frequently asked questions
What is the difference between open-tray and closed-tray impression copings?
With the open-tray technique, the coping is unscrewed before removal and remains embedded in the impression. With the conventional closed-tray technique, it initially stays in the mouth and is then connected to the analog and repositioned in the impression.
Is the open-tray technique always more accurate?
No. It may offer advantages for multiple-implant and extensive restorations, but accuracy also depends on component seating, impression material, the tray, and technique execution. A closed-tray technique can be appropriate in favorable cases.
Is splinting the copings required for an open-tray impression?
No. Splinting may be indicated to stabilize the record of multiple implants. When used, it requires control of material shrinkage and stresses according to the selected protocol.
Can I use any analog that fits the impression coping?
No. The analog must have confirmed compatibility with the coping and the impression level. An apparent fit does not guarantee matching geometry, platform, or tolerances.
Can the closed-tray technique be used with divergent implants?
That depends on the degree of divergence, the components, and the path of removal. Significant divergence can make the technique difficult and favor other approaches selected after clinical evaluation.
Does a scan body replace an impression coping?
In a digital workflow, a scan body records references that allow the software to locate the prosthetic interface. It can replace the conventional transfer step when the system and protocol are appropriate, but it requires a compatible library and verification of complete seating.
Dental care in Botafogo · Rio de Janeiro
Your smile deserves personalized care
Talk to Dr. Welson Pimentel about implants, prosthetics and oral health. An assessment is the first step toward understanding the right care for you.
- ✓ Dental implants
- ✓ Dental prosthetics
- ✓ Oral health






















