3D Anatomical Models in Dentistry: Surgical and Educational Applications

3D anatomical models turn patient imaging into physical replicas that help clinicians study anatomy and prepare for procedures. Explore their surgical and educational applications and the considerations that determine their clinical usefulness.

By Dr. Welson Pimentel·Updated ·8 min read

A 3D anatomical model in dentistry is a physical replica of anatomical structures, produced through 3D printing using patient imaging data. It supports surgical planning, procedure simulation, and education by allowing clinicians to examine anatomical relationships beyond the screen. Its usefulness depends on imaging quality, digital modeling, and clinical interpretation: the model complements, but does not replace, diagnosis.

What Is a 3D Dental Anatomical Model?

A dental anatomical model physically represents a region of interest, such as the maxilla, mandible, or part of the craniofacial complex. Depending on its purpose, it may highlight bony structures, teeth, cavities, or anatomical pathways identifiable on imaging.

To represent internal bony anatomy, the starting point is usually a CT scan, often cone-beam computed tomography (CBCT). Intraoral scanning, by contrast, captures visible surfaces, such as teeth and gingiva, but cannot independently reveal the bone beneath the tissues.

This distinction matters: printing a dental arch from an intraoral scan is not the same as reproducing the internal anatomy of the mandible. Although both are three-dimensional models, they answer different clinical questions.

Anatomical Model, Dental Arch Model, and Surgical Guide

In digital dental treatment planning, these resources can complement one another, but they should not be confused.

Resource What it represents or does Main application
Anatomical model Reproduces structures selected from imaging Anatomical study, simulation, and communication
Dental arch model Reproduces tooth and gingival surfaces Assessment and stages of prosthodontic or orthodontic workflows
Surgical guide Incorporates references to transfer part of the plan to the procedure Guidance for drilling, cutting, or other actions specified in the design

An anatomical model used to study implant positioning does not, by itself, guide the drill during surgery. Transferring that plan requires dedicated devices and protocols when indicated.

Read also: Outsourced Implant Planning: Why the Surgeon Must Validate the Guide Before Printing · Prosthetically Driven Implant Planning: The Tooth Leads, the Implant Follows · DICOM and STL Files: What They Are and How to Combine Them for Treatment Planning

How 3D Anatomical Models Are Produced in Dentistry

Printing is only one step in the process. Before printing, a series of decisions determines which anatomical information will be preserved and how it can be used.

1. Defining the Clinical Question

The first step is to establish what the clinician needs to understand: the extent of a bone defect, access to a region, the position of an impacted tooth, or the geometry of an area requiring reconstruction.

This question guides the anatomical region selected and the level of detail needed. Printing the entire face when only one segment matters may add work without improving clinical decision-making.

2. Acquiring and Evaluating Imaging

For bony structures, CT files in DICOM format are frequently used. Motion, metal artifacts, and inappropriate acquisition parameters can make anatomical boundaries difficult to define.

CT imaging must be clinically justified. Additional radiation exposure should not be requested solely to create a demonstration model when the imaging data are not needed for patient care.

3. Segmenting Anatomical Structures

Segmentation means selecting the tissues or regions in the images that will become part of the model. It is not simply a matter of pressing a button: automated selection may require review, particularly in areas with thin bone, artifacts, or poorly defined boundaries.

An error at this stage can create an opening that does not exist or erase a delicate bony wall. A convincing-looking printed model does not correct inadequate segmentation.

4. Preparing the File for Printing

The selected surface is converted into a three-dimensional mesh. At this stage, the mesh is assessed for defects, support requirements, print orientation, and any need to divide the model into sections.

Excessive smoothing can eliminate relevant details. If a model is enlarged, reduced, or simplified for teaching purposes, this must be clearly identified so it is not mistaken for a life-size reproduction.

5. Printing, Post-Processing, and Verification

The choice of technology and material depends on the intended purpose. Once printed, the anatomical model may require cleaning, support removal, and other material-specific procedures, such as post-curing for certain resins.

Final verification should check integrity, scale, and correspondence with the design. For critical applications, acceptance criteria and a dimensional verification strategy appropriate to the intended use should be established in advance.

Surgical Applications of 3D Anatomical Models

The main benefit of an anatomical model is that it turns three-dimensional information into an object that can be handled. This can improve spatial understanding when anatomy is complex or when multiple clinicians need to discuss the same case.

Implant Dentistry and Bone Reconstruction

In implant dentistry, an anatomical model can help clinicians study atrophic ridges, extensive defects, and relationships with adjacent structures. It can also support discussions about surgical access and reconstruction needs.

However, implant positioning must be planned with the future prosthesis, tissues, occlusion, and imaging in mind. Examining the printed bone in isolation does not address these variables.

When reconstruction is indicated, the model can help clarify the shape and extent of the defect. Any preoperative adaptation of devices requires a validated workflow that follows the manufacturer's instructions and applicable processing requirements.

Impacted Teeth and Difficult-to-Interpret Anatomy

Impacted teeth in unusual positions may have anatomical relationships that are difficult to visualize on two-dimensional images. A well-designed anatomical model allows clinicians to examine the region from different angles and discuss potential approaches.

Cutaway sections or removable parts can improve visualization. However, highlighted structures, such as a nerve pathway, represent an interpretation of the imaging and should not be regarded as infallibly defined boundaries.

Oral and Maxillofacial Surgery and Asymmetries

In selected cases involving deformities, asymmetries, trauma, or bone defects, an anatomical model can complement digital assessment. Handling the model makes it easier to analyze contours and discuss strategies among team members.

When used to rehearse cuts or repositioning, the model must be suitable for that purpose. Simulation does not fully reproduce bleeding, tissue elasticity, bone strength, or limitations of access in the patient.

Dental Anatomical Models in Education and Training

Educational use goes beyond displaying a printed mandible. An anatomical model can make learning more active by allowing students to compare hypotheses, identify anatomical landmarks, and explain the reasoning behind a decision.

Potential applications include:

  • Anatomy education: observing anatomical landmarks and variations among individuals.
  • Case discussions: connecting clinical examination findings, CT slices, and physical representations.
  • Preclinical training: rehearsing technical steps using appropriate materials.
  • Patient education: explaining anatomical changes and proposed treatments.
  • Team coordination: aligning the surgeon, prosthodontist, and digital planning professionals.

The Material Determines the Type of Training

A rigid model intended for visualization is not necessarily suitable for practicing drilling or osteotomies. Different materials behave differently under rotary instruments, including in terms of heat generation, wear, and particle production.

Training should follow instructions for use, ventilation, and protective measures. The tactile feel of a printed material should not be presented as equivalent to human bone, especially when the exercise involves decisions about implant stability.

Benefits and Limitations of Anatomical Models in Digital Planning

Anatomical models can improve spatial understanding, support rehearsal, and facilitate communication. The literature describes these applications in various settings, but outcomes depend on the case, production process, and team's experience.

It is not appropriate to claim that every printed model reduces operating time or prevents complications. These potential benefits must be evaluated according to the indication and are not guaranteed for an individual case.

Why Isn't an Anatomical Model a Perfect Copy of the Patient?

Limitations exist throughout the workflow: imaging resolution, segmentation, mesh processing, printing, and post-processing. In addition, the data represent the anatomy at the time of acquisition and may no longer reflect the current situation after clinical changes.

An anatomical model also does not, by itself, demonstrate:

  • Biological conditions for healing and vascularization.
  • The actual mechanical quality of the bone.
  • Soft tissue mobility and behavior.
  • The presence or activity of disease without diagnostic interpretation.
  • All limitations involving access, mouth opening, and instrumentation.

For this reason, the model should be assessed alongside the original imaging, clinical examination, and prosthetic treatment plan when relevant.

When Is It Worth Ordering a 3D Anatomical Model?

The indication is strongest when the physical model answers a question that remains relevant after digital assessment. In straightforward cases, software visualization may be sufficient.

Before ordering, consider these questions:

  1. What clinical decision or educational objective will the model support?
  2. Which structures need to be shown, and at what scale?
  3. Is the available imaging of sufficient quality for this purpose?
  4. Will the model only be viewed, or will it also be cut and drilled?
  5. Will it come into contact with clinical devices or the surgical field?
  6. How will the model be verified before use?

Anatomical complexity, segmentation requirements, size, material, and finishing all affect the production workload. Clinical value, however, does not lie in the volume printed: it lies in the useful information the model adds.

In Clinical Practice

In the approach used by Dr. Welson Pimentel, a dentist with more than 30 years of experience and training in implant dentistry, prosthodontics, and digital planning, the central question should come before the technology: what do we need to understand better to plan this case?

In an illustrative example of rehabilitation involving substantial bone loss, the appropriate sequence does not begin with printing. First, the prosthetic objectives, clinical examination, and CT imaging are integrated. Next, the team evaluates whether handling an anatomical model would help clarify the defect, surgical access, or a possible reconstruction.

For the requesting dentist, a useful order specifies the region of interest, the clinical question, and the intended use. “I need to visualize the buccal wall and examine the extent of the defect” provides better production guidance than simply requesting “a printed mandible.”

This attention to detail connects digital planning with the actual needs of the dental practice. It also facilitates patient communication, provided the clinician explains what the model shows and which aspects still require clinical and intraoperative assessment.

Infection Control and Data Protection in the 3D Workflow

A study model should not automatically be brought into the surgical field. Whether it can be cleaned, disinfected, or sterilized depends on the material, intended purpose, and validated processes. Some procedures may deform the model or alter its properties.

If contact with clinical devices is anticipated, this must be communicated before manufacturing. No resin or filament should be assumed suitable for such use without verification.

The files also require care. Patient imaging and derived digital models should be treated as health data, with restricted access and secure sharing. For teaching and publication, applicable legal requirements, authorization when required, and de-identification measures must be observed. Removing a name should not be assumed to eliminate all risk of identification.

Have questions about your treatment? Book an assessment at Dr. Welson Pimentel’s dental practice in Botafogo, Rio de Janeiro, to discuss your needs and care options. Visit the dental practice

Conclusion

A 3D anatomical model in dentistry is a tool that supports surgical planning, education, and communication. Its main contribution is to enable physical exploration of selected anatomy, provided production preserves relevant information and its limitations are recognized.

Appropriate use begins with a clinical question and ends with verification of the finished model. To assess whether an anatomical model could add useful information to your case, speak with Dr. Welson Pimentel or the Planejamento Express team and integrate this step into your digital planning workflow.

Frequently asked questions

What is a 3D anatomical model in dentistry?

It is a physical replica of anatomical structures, produced through 3D printing using imaging data. It can be used to study anatomy, support surgical planning, and develop educational activities.

What is the difference between an anatomical model and a surgical guide?

An anatomical model reproduces anatomy for study or simulation. A surgical guide is designed to guide steps of a procedure, such as drilling or cutting, according to the treatment plan and indicated protocol.

Is a CT scan required to produce an anatomical model?

CT imaging data are generally needed to reproduce internal bony structures. Models of tooth surfaces can be produced from intraoral scans. Any request for CT imaging must be clinically justified.

Does a 3D anatomical model reproduce bone strength?

Not necessarily. Its behavior depends on the material and manufacturing process. A model intended for visualization may not be suitable for drilling, and its strength should not be interpreted as equivalent to that of the patient's bone.

Can every dental anatomical model be sterilized?

No. Whether a model can be sterilized depends on the material and a validated process for the intended purpose. Inappropriate methods may deform the model or alter its properties.

Is a 3D anatomical model necessary for every implant surgery?

No. It should be considered when it adds useful information to clinical and digital assessment, particularly for complex anatomy or simulation. In many cases, software-based planning is sufficient.

Dental care in Botafogo · Rio de Janeiro

Your smile deserves personalized care

Talk to Dr. Welson Pimentel about implants, prosthetics and oral health. An assessment is the first step toward understanding the right care for you.

  • ✓ Dental implants
  • ✓ Dental prosthetics
  • ✓ Oral health
Visit the dental practice →
Dr. Welson Pimentel

Read next

Videos on YouTube

O Código da Cirurgia Guiada · Parte 1O Código da Cirurgia Guiada · Parte 2O Código da Cirurgia Guiada · Parte 3O Código da Cirurgia Guiada · Parte 4O Código da Cirurgia Guiada · Parte 5Técnica de Duplo EscaneamentoTécnica Ibar contra fraturas na zircôniaExoplan sem mistérios · DICOM e STLExoplan sem mistérios · Enceramento diagnósticoBlender for Dental · IntroduçãoBlender for Dental · Malhas e ferramentas

O Código da Cirurgia Guiada · Parte 1

▶ Planejamento Express · Subscribe →
Como desenhar Ti-Base angulado no ExocadScan reverso ou scan analógicoExocad 3.3 · Modelo com análogo digitalUm scan body diferenteIA na confecção de placas oclusaisBiblioteca Exocad de implantes EFFBlender for Dental · Coroa provisória rápidaAula Exoplan · Escolha e posicionamento do implanteComo escanear implantes com MeditMedit splint · JIG de Lucia

Como desenhar Ti-Base angulado no Exocad

▶ Dicas do Pimentel · Subscribe →