Infection Control in Digital Dentistry: Guides, Models, and Scanners

Digital workflows do not eliminate contamination risks—they shift the areas that need attention. Learn how to organize the processing of scanners, surgical guides, and printed models.

By Dr. Welson Pimentel·Updated ·8 min read

Infection control in digital dentistry depends on identifying each device’s risk, performing processing appropriate for its use, and following the manufacturers’ instructions. Intraoral scanners, surgical guides, and printed models require different precautions: digitizing treatment does not automatically make materials clean, disinfected, or sterile. A safe workflow integrates patient care, printing, post-processing, transport, and traceability.

Infection Control in Digital Dentistry: What Changes in the Office?

Digital dentistry reduces some physical steps, such as transporting certain impressions, but introduces other surfaces and materials into daily practice. Scanner tips, screens, keyboards, wash containers, build platforms, and resin-printed parts become part of the workflow.

The main risk is confusing technology with the absence of contamination. A digital file does not transmit microorganisms, but the hands operating the computer, the device touching the mouth, and the packaging moving between work areas can contribute to cross-contamination.

Improper processing can also compromise both biological safety and accuracy. Heat, chemicals, and incorrect handling may alter materials’ dimensions, transparency, or strength, depending on their composition.

The key question is not just “How do we disinfect this?” but “What processing makes this device safe for its intended use without compromising its function?”

Read also: How to Move Beyond Dental Implant Price Wars by Communicating the Value of Guided Surgery · Implant Dentistry Conferences: How to Get the Most Out of Them · Bilingual Dentists: English and French in Dental Care

Cleaning, Disinfection, and Sterilization in Digital Workflows

These terms describe different processes and should not be used interchangeably.

  • Cleaning: Removal of soil and residue, including organic matter. This is an essential step before disinfecting or sterilizing reusable devices.
  • Disinfection: Reduction or elimination of microorganisms to a specified level, without necessarily eliminating all microbial forms.
  • Sterilization: A validated process intended to eliminate all viable forms of microorganisms, including bacterial spores.

Risk classification considers the intended contact. Critical items penetrate sterile tissue or contact structures that require sterility; semicritical items contact mucous membranes or nonintact skin; noncritical items contact intact skin. Environmental surfaces also need their own cleaning and disinfection protocols.

This classification must be considered alongside the device’s intended purpose, instructions for use, and applicable health regulations. For heat-sensitive items, choosing a gentler method for convenience is not enough: a validated process appropriate to the risk must be confirmed.

Comparing Precautions for Digital Devices

Item Key concern Essential action
Intraoral scanner tip Contact with mucous membranes and saliva Process between patients according to specific instructions; sterilize when indicated and compatible
Scanner body and cable Contamination from hands and splashes Use barriers when indicated and perform compatible cleaning and disinfection
Guide used in implant surgery Use in the surgical field Use a material and workflow that allow validated sterilization
Model for bench-top study Handling and movement between work areas Keep clean, protected, and separate from contaminated items
Model or part used in patient care Exposure beyond its intended bench-top use Reassess the material’s indication and required processing
Keyboard, mouse, and screen Contact with contaminated gloves Establish barrier use and a cleaning and disinfection protocol

This table supports an initial assessment but does not replace each product’s specific protocol.

Intraoral Scanners: Infection Control Between Patients

An intraoral scanner has components with different requirements. The tip may directly contact the mouth; the body and cable may be exposed to splashes; and the workstation may be touched during treatment.

Treating the entire system as a single surface is a mistake. Each component needs a routine compatible with its function and its ability to withstand processing.

How to Process Scanner Tips

Before purchasing a scanner, review the processing instructions for its tips. Check whether they are reusable or disposable, which methods are permitted, and whether there is a reuse limit.

For reusable tips, the routine may include cleaning, inspection, drying, packaging, and sterilization, as specified by the manufacturer. If mirrors or optical components are present, residue and damage can also interfere with scanning.

The team should track use when a cycle limit applies and remove damaged parts from service. A tip that appears intact is not automatically cleared for reuse.

If the documentation specifies another method for a heat-sensitive device, confirm that it meets local regulatory requirements. Inability to autoclave a device does not justify improvised disinfection.

Scanner Body, Cable, and Computer

Disposable barriers help reduce contamination but do not replace the indicated cleaning and disinfection. They must be changed between patients and removed without contaminating the protected surfaces.

Do not spray products directly into connections, openings, or electronic components, or immerse parts without the manufacturer’s explicit authorization. Chemical compatibility, concentration, and contact time must be observed.

During scanning, avoid touching keyboards, phones, and drawers with contaminated gloves. An assistant assigned to the workstation or a protected interface can simplify the routine without replacing hand hygiene and appropriate glove changes.

Printed Surgical Guides: From Resin to Sterility

A surgical guide must provide accuracy, stability, and biological safety appropriate for the procedure. A satisfactory fit on the model does not prove that the part is ready to enter the surgical field.

Safety begins with selecting a resin indicated for surgical guides and compatible with the required processing. It also depends on the printer, the parameters used, and compliance with the specified washing and post-curing steps.

Washing and Post-Curing Are Not Sterilization

Washing removes uncured resin residue. Post-curing advances polymerization and helps achieve the material’s intended properties. Neither step, by itself, demonstrates sterility.

Likewise, using alcohol during washing does not automatically make that procedure a validated disinfection process. Light exposure in a post-curing unit should not be interpreted as sterilization either.

The manufacturer’s stated biocompatibility is tied to the specified manufacturing and post-processing conditions. Shortening steps or substituting equipment without validation may invalidate those conditions.

Surgical Guide Sterilization Without Improvisation

Not every resin tolerates the same sterilization cycle. A parameter appropriate for one product may deform another, alter its fit, or compromise component retention.

Before production, confirm:

  • The material’s clinical indication and applicable regulatory status;
  • Printing, washing, and post-curing instructions;
  • Authorized sterilization method and parameters;
  • Compatibility of guide sleeves and other components;
  • Assembly, cleaning, and packaging sequence;
  • Storage and use conditions after processing.

Compatibility must account for the entire assembly, not just the resin. Do not assume that sleeves, adhesives, and accessories tolerate the same processing.

A clinical try-in of a nonsterile guide also requires planning. If it contacts the mouth before surgery, it must undergo the applicable processing again before use in the sterile field. If no validated method exists for this, the workflow must be revised.

3D Printed Models: Intended Use Determines the Precautions

Models used exclusively for study, planning, or bench-top verification do not have the same requirements as devices intended for intraoral contact. Even so, they must move through an organized environment and remain protected against contamination.

One common risk is placing a contaminated clinical appliance on a clean model. From that point forward, the model must be treated as potentially contaminated rather than simply returned to the shelf.

Another precaution is avoiding informal changes in intended use. A model resin should not be used for a guide, impression tray, provisional restoration, or intraoral device simply because it looks good or appears strong. Its indication for use is specific.

Separating the Clean Bench from the Contaminated Area

Define areas or an operational sequence that separates:

  • Newly printed parts with resin residue;
  • Materials undergoing washing and post-curing;
  • Clean, post-processed devices;
  • Items received after clinical use;
  • Packaged and sterilized materials.

Handling resins and solvents also involves chemical safety. Ventilation, protective equipment, storage, and disposal must follow safety data sheets and local requirements. Safety includes protecting the team during fabrication, not just the patient during treatment.

Step-by-Step Guide to Organizing Digital Infection Control

A useful protocol must be practical, understood by the team, and verifiable. Lengthy documents without clearly assigned responsibilities rarely resolve routine failures.

1. Map Devices and Their Uses

List scanners, tips, accessories, guides, models, and post-processing equipment. Record which items enter the mouth, are used in surgery, or remain on the bench.

2. Gather Manufacturers’ Instructions

Keep current versions readily accessible. When compatibility between materials or components is unclear, obtain technical clarification before use, preferably in writing.

3. Assign Responsibilities

Establish who receives, cleans, inspects, packages, sterilizes, and releases each item for use. For outsourced services, agree in writing on the condition in which the device will be delivered and who will perform final processing.

4. Standardize Processing and Storage

Describe products, steps, parameters, and discard criteria. Include equipment maintenance and sterilization monitoring with physical, chemical, and biological indicators, as required by applicable regulations.

5. Implement Risk-Based Traceability

For surgical guides, record the case identification, treatment plan version, material and lot number, fabrication, post-processing, and sterilization. Linking the device, patient, and cycle makes it easier to investigate potential failures.

6. Check Before Treatment

Verify packaging integrity, identification, storage conditions, and clearance for use following processing. The check should also confirm that the guide matches the approved plan and the correct patient.

7. Review the Workflow Whenever Something Changes

Changing the resin, printer, solvent, post-curing unit, or sterilization method may require a protocol review. Retrain the team and avoid substitutions based solely on availability.

In Clinical Practice

In Dr. Welson Pimentel’s clinical approach, which combines implant dentistry, prosthodontics, and digital treatment planning, infection control should be part of planning—not a step added the day before surgery.

This means checking, before producing a guide, whether the office has processing capabilities compatible with that material. It also means allowing time for try-in, any adjustments, cleaning, sterilization, and verification without relying on shortcuts to stay on schedule.

From a practice management standpoint, do not plan capacity around having only one scanner tip or around printing time alone. The availability of processed items, maintenance, drying, transport, and clearance for use also affect patient care capacity.

In communication between the office and laboratory, clear labeling—for example, stating that a device has been post-processed but not sterilized—prevents dangerous assumptions. “Ready to ship” and “ready for surgical use” are not the same condition.

Have questions about your treatment? Book an assessment at Dr. Welson Pimentel’s dental practice in Botafogo, Rio de Janeiro, to discuss your needs and care options. Visit the dental practice

Conclusion

Infection control in digital dentistry requires consistency among clinical indication, material, fabrication, and processing. Scanners, guides, and models need distinct protocols connected by training, traceability, and clear communication.

A safe workflow does not depend on a single product: it depends on verifiable steps, without improvisation that compromises biological safety or accuracy. To integrate these decisions into guided surgery case planning, contact Planejamento Express or Dr. Welson Pimentel.

Frequently asked questions

Does an intraoral scanner tip need to be sterilized?

The tip must be processed between patients according to its risk classification, the manufacturer’s instructions, and applicable regulations. Reusable tips compatible with sterilization must follow the specified method; disposable tips must not be reused.

Can every 3D printed surgical guide be autoclaved?

No. Compatibility depends on the resin, post-processing, and guide components. Use only a method and parameters validated for the product and appropriate for its surgical purpose.

Does washing a surgical guide with alcohol sterilize it?

No. Washing during fabrication removes resin residue but does not demonstrate sterility. Post-curing also does not replace the sterilization required before surgical use.

Do printed dental models need to be sterilized?

Models intended exclusively for bench-top use generally do not require sterilization. They must remain clean and protected; if contamination occurs or their intended use changes, the processing requirements and material indication must be reassessed.

Who should sterilize the guide: the laboratory or the dental office?

Responsibility must be agreed upon in advance, in compliance with applicable health regulations. The dental office must confirm the delivery condition, documentation, and clearance for use following processing before using the guide.

Do disposable barriers eliminate the need to disinfect the scanner?

No. They reduce contamination but do not replace the care specified for each component. They must be changed between patients, with careful removal and cleaning and disinfection compatible with the equipment.

Dental care in Botafogo · Rio de Janeiro

Your smile deserves personalized care

Talk to Dr. Welson Pimentel about implants, prosthetics and oral health. An assessment is the first step toward understanding the right care for you.

  • ✓ Dental implants
  • ✓ Dental prosthetics
  • ✓ Oral health
Visit the dental practice →
Dr. Welson Pimentel

Read next

Videos on YouTube

O Código da Cirurgia Guiada · Parte 1O Código da Cirurgia Guiada · Parte 2O Código da Cirurgia Guiada · Parte 3O Código da Cirurgia Guiada · Parte 4O Código da Cirurgia Guiada · Parte 5Técnica de Duplo EscaneamentoTécnica Ibar contra fraturas na zircôniaExoplan sem mistérios · DICOM e STLExoplan sem mistérios · Enceramento diagnósticoBlender for Dental · IntroduçãoBlender for Dental · Malhas e ferramentas

O Código da Cirurgia Guiada · Parte 1

▶ Planejamento Express · Subscribe →
Como desenhar Ti-Base angulado no ExocadScan reverso ou scan analógicoExocad 3.3 · Modelo com análogo digitalUm scan body diferenteIA na confecção de placas oclusaisBiblioteca Exocad de implantes EFFBlender for Dental · Coroa provisória rápidaAula Exoplan · Escolha e posicionamento do implanteComo escanear implantes com MeditMedit splint · JIG de Lucia

Como desenhar Ti-Base angulado no Exocad

▶ Dicas do Pimentel · Subscribe →